C-Tec XFP510-32 XFP 32 Zone Repeater Panel (all protocols)
XFP 32 Zone Repeater Panel (all protocols)Addressable Fire Systems C-Tec Cast XFP 1-2 Loop Fire Panels
- Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all potential fire service entrances).
- Offers all of the functions and controls of an XFP Main panel (access levels 1, 2 and 3).
- Includes an on-board fault relay.
- Requires its own dedicated Mains power and battery back-up supply.
- A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel.
- Communication between the XFP Main panel and Repeater requires an AFP711 network driver card (fitted as standard in all XFP510-32s, available as an optional extra on Main XFP 32 Zone panels).
- Repeater network is non-redundant and wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.
Technical Specifications:
| Protocol/compatibility |
Compatible with C-TEC's XFP CAST, Apollo XP95/Discovery and Hochiki ESP main panels. |
|---|---|
| Mains supply |
230V 50/60Hz. |
| Mains rated current |
680mA maximum. |
| Internal power supply |
27Vdc nominal. |
| Total output current limited to |
3A @ 230Vac (Imax.A 250mA; Imin. 70mA). |
| Quiescent current |
TBC. |
| Max battery size and type |
2 x 12V 7Ah VRLA connected in series. |
| Auxiliary relays |
Fault (Failsafe; Capable of switching 1A @ 30V DC; Must not be used for switching Mains voltages). |
| PC connection |
None. |
| Indicators |
2 line x 40 character backlit display; 32 Zonal LEDs, General Fire; Energised; Pre-Alarm; Remote Output Activated; Remote Output Disabled; Accessed; Disablement; Test; Silenced; General Fault; Syst |
| Expansion connections |
On board AFP711 network driver card facilitates the connection of additional XFP Repeaters. |
| Product dimensions (mm) |
410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid). Hole required for semi-flush mounting = 412 W x 255 H x 50 D mm (requires XFP385 bezel). |
| Construction & finish |
Metal. |
| IP Rating |
TBC. |
| Weight |
4.5kg (no batteries). |
| Operating conditions/temperature |
-5ºC to +40ºC. Max relative humidity: 95%. |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
XFP 32 Zone Repeater Panel (all protocols)Addressable Fire Systems C-Tec Cast XFP 1-2 Loop Fire Panels
- Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all potential fire service entrances).
- Offers all of the functions and controls of an XFP Main panel (access levels 1, 2 and 3).
- Includes an on-board fault relay.
- Requires its own dedicated Mains power and battery back-up supply.
- A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel.
- Communication between the XFP Main panel and Repeater requires an AFP711 network driver card (fitted as standard in all XFP510-32s, available as an optional extra on Main XFP 32 Zone panels).
- Repeater network is non-redundant and wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.
Technical Specifications:
| Protocol/compatibility |
Compatible with C-TEC's XFP CAST, Apollo XP95/Discovery and Hochiki ESP main panels. |
|---|---|
| Mains supply |
230V 50/60Hz. |
| Mains rated current |
680mA maximum. |
| Internal power supply |
27Vdc nominal. |
| Total output current limited to |
3A @ 230Vac (Imax.A 250mA; Imin. 70mA). |
| Quiescent current |
TBC. |
| Max battery size and type |
2 x 12V 7Ah VRLA connected in series. |
| Auxiliary relays |
Fault (Failsafe; Capable of switching 1A @ 30V DC; Must not be used for switching Mains voltages). |
| PC connection |
None. |
| Indicators |
2 line x 40 character backlit display; 32 Zonal LEDs, General Fire; Energised; Pre-Alarm; Remote Output Activated; Remote Output Disabled; Accessed; Disablement; Test; Silenced; General Fault; Syst |
| Expansion connections |
On board AFP711 network driver card facilitates the connection of additional XFP Repeaters. |
| Product dimensions (mm) |
410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid). Hole required for semi-flush mounting = 412 W x 255 H x 50 D mm (requires XFP385 bezel). |
| Construction & finish |
Metal. |
| IP Rating |
TBC. |
| Weight |
4.5kg (no batteries). |
| Operating conditions/temperature |
-5ºC to +40ºC. Max relative humidity: 95%. |
